"Let the fresh air in and keep the pests out!"
The Bug Blocker® Industrial Screen Door Engineering Specifications
To Provide a Bug Blocker® Industrial Screen Door for both ventilation and security. The industrial screen door is to be retrofitted into existing doorways and use 304 Stainless Steel Screen to withstand the industrial environment.
Under normal circumstances the door shall be under 4’ wide and 14’ tall. There will be a kick plate for the bottom, perimeter seal for the two sides and top, one handle and a bottom brush seal. There is a choice of piano hinge or spring loaded hinges.
The frame shall be aluminum alloy 6063-T6 mill finish, with stainless steel screen permanently attached. Frames shall be aluminum extrusion, and shall be 1” x 1-1/4” wide with internal steel corners and 3/16” pins.
The screening shall be 304 stainless steel in either of the following configurations:
|Mesh||Wire Diameter||Opening Size||Free Area|
|Standard||12x12||0.023″||0.0603 in. sq.||51.8%|
|Fine||30x30||0.011″||0.0223 in. sq.||44.8%|
MEETS FEDERAL SPECIFICATION STANDARD A-A-1037B DATED APRIL 19, 1990 FOR TYPE I, CLASS I WIRE FABRIC.
MEETS THE ASTM STANDARD SPECIFICATION FOR INDUSTRIAL WIRE CLOTH AND SCREENS, DESIGNATION E 437-85.(Revised 5/2010)
The screen shall be the Bug Blocker® as produced by Rasco Industries, Inc. or approved equal.
Interested in learning more about our security screens and bird screen products? Watch our product videos or contact us today and we will be happy to provide you more information about the overhead security doors we offer.