The Bug Blocker® Air Inlet Screen
Panel
Engineering Specifications
Print
this pageTo provide a Bug Blocker® air inlet screen panel for mounting on windows or louvered air inlet openings for ventilation and/or security. The panel may be provided to mount on the surface, or for insert into a frame assembly. The panel uses 304 STAINLESS STEEL SCREEN to withstand the rigors of an industrial environment.
Specification:
The Air Inlet Screen Panel shall be the heavy duty Bug
Blocker® screen as supplied by Rasco
Industries, Inc.
Frame:
The frame shall be aluminum alloy 6063-T6 mill finish,
with stainless steel screen permanently attached.
Surface Mount:
Frame sections shall be aluminum extrusion, and shall
be 1″ x 1-1/4″ wide. Maximum section 25-1/2″ wide x
120″ high. An extruded divider to be provided every 48 inches of
height. Multiple units may be stacked side by side with a finger and groove
providing the interlocking of mating edge. Units are easily inserted into
a top "Z" bracket channel and dropped into a lower "Z"
bracket. As they are slid 1/4″ to the left they interlock with the
next section. A holding bolt prevents section removal without first removing
the bolt.
Insert Mount:
Frame shall be a 1-1/4″ x 1″ aluminum angle
inset into the frame 1″. Maximum single screen 48″ high x
72″ wide. Units are mounted with a #8 screw mounted through the
frame with a Dzus type slide fastener on the frame for easy removal. An
extruded divider to be provided every 24 inches of width.
Screen:
The screening shall be 304 stainless steel in either
of the following configurations:
MEETS FEDERAL SPECIFICATION STANDARD A-A-1037B DATED APRIL 19, 1990 FOR TYPE I, CLASS I WIRE FABRIC.
MEETS THE ASTM STANDARD SPECIFICATION FOR INDUSTRIAL WIRE CLOTH AND SCREENS, DESIGNATION E-437-85.
The screen shall be the Bug Blocker® as produced by Rasco Industries, Inc. or approved equal.
(Revised 11/28/2000)| Mesh | Wire Diameter | Opening Size | Free Area | |
| Standard | 12x12 | 0.023″ | 0.0603 in. sq. | 51.8% |
| Fine | 30x30 | 0.011″ | 0.0223 in. sq. | 44.8% |
MEETS FEDERAL SPECIFICATION STANDARD A-A-1037B DATED APRIL 19, 1990 FOR TYPE I, CLASS I WIRE FABRIC.
MEETS THE ASTM STANDARD SPECIFICATION FOR INDUSTRIAL WIRE CLOTH AND SCREENS, DESIGNATION E-437-85.
The screen shall be the Bug Blocker® as produced by Rasco Industries, Inc. or approved equal.
Learn more about some of the products that Bug Blocker provides by reading our executive summaries of the overhead screen doors and overhead security doors. Contact us to request literature or more information about our ventilating doors and bug barrier products.
